3 Audio Generator Functions
100 Keysight U8903B User’s Guide
Figure 3-2 Digital Generator menu page
Table 3-2 Digital Generator menu description
Menu Description
Waveform
Press the Waveform softkey to display the list of available digital generator waveform types. Select the desired waveform
from the drop-down list.
Waveform Config
Press the Waveform Config softkey to set the current active waveform configuration such as frequency, amplitude, and
others. Refer to “Waveform Configuration” on page 102 for more information.
Output Config
Press the Output Config softkey to set the output configurations such as the connector type, impedance, and others. Refer
to “Output Configuration (Digital Generator)” on page 143 for more information.
DSI Config
Press the DSI Config softkey to set the DSI output configurations such as the format, resolution, and others. Refer to “DSI
Output Configuration (Digital Generator)” on page 157 for more information.
AES3/SPDIF
Press the AES3/SPDIF softkey to set the AES3/SPDIF output configurations such as the level, resolution, and others. Refer
to “AES3/SPDIF Output Configuration (Digital Generator)” on page 159 for more information.
References
Press the References softkey to configure the output references settings that are used in the unit conversion. Refer to
“References (Digital and Bluetooth Generator)” on page 172 for more information.
To Next Page
Loading...
