3 Audio Generator Functions
146 Keysight U8903B User’s Guide
Link Configuration (Bluetooth Generator)
The link configuration for the Bluetooth generator is displayed as shown in Figure 3-60.
Figure 3-60 Bluetooth Generator > Link Config menu page
When connecting the U8903B to a PC's Bluetooth using A2DP profile where the U8903B
acts as source, initiate the connection from the PC (as sink) instead of U8903B. The
U8903B does not support the initialization of A2DP source profile connection from the
U8903B when connecting to a PC.
Table 3-32 Bluetooth Generator > Link Config menu description
Menu Description
Device Scan
Press the Device Scan softkey to configure the device scan settings when searching for discoverable Bluetooth devices
within range. Refer to “Device scan” on page 147 for more information.
Device Action
Press the Device Action softkey to configure the Bluetooth device action settings such as unpair device, profile connection,
and others. Refer to “Device action” on page 148 for more information.
Common Settings
Press the Common Settings softkey to configure the Bluetooth common settings such as profile, discoverable, and others.
Refer to “Common settings” on page 150 for more information.
A2DP Settings
Press the A2DP Settings softkey to configure the Bluetooth advanced audio distribution profile settings. Refer to “A2DP
settings” on page 153 for more information.
HFP Settings
Press the HFP Settings softkey to configure the Bluetooth handsfree/headset profile settings. Refer to “HFP settings” on
page 154 for more information.
AVRCP Log View
Press the AVRCP Log View softkey to configure the Bluetooth audio/video remote control profile operation log. Refer to
“AVRCP log view” on page 156 for more information.
To Next Page
Loading...
