Keysight U8903B - DC Signal; Figure 3-35 Analog Generator > Waveform Config Menu Page (DC Signal); Table 3-15 Analog Generator > Waveform Config Menu Description (DC Signal)

Audio Generator Functions 3
Keysight U8903B User’s Guide 123
DC signal
DC signal output is used when a low current DC supply is required. Examples include,
biasing amplifiers or other similar circuitry.
DC signal mode is applicable for the analog generator only. The waveform configuration for
DC signal is displayed as shown in Figure 3-35.
Figure 3-35 Analog Generator > Waveform Config menu page (DC signal)
Table 3-15 Analog Generator > Waveform Config menu description (DC signal)
Menu Description
Voltage Voltage refers to the amplitude of the composite signal.