Keysight U8903B - Figure 2-31 System > HP8903 B Config Menu Page; Table 2-21 System > HP8903 B Config Menu Description

Operation and Features 2
Keysight U8903B User’s Guide 89
HP8903B Config
Press the HP8903B Config softkey to display the HP8903B Config menu page.
Figure 2-31 System > HP8903B Config menu page
NOTE
– The HP8903B configuration settings will not be affected by any reset operation.
– Refer to Chapter 8, “HP8903B” for more information on the HP8903B mode.
Table 2-21 System > HP8903B Config menu description
Menu Description
Active Channel
Press the Active Channel softkey to select the HP8903B active channel.
–1
–2
Left Filter
Press the Left Filter softkey to select the left filter type. The left filter represents the filter on the left side of the HP8903B
front panel. The HP8903B filter may be different according to the model and the purchased HP8903B option. The default
left filter is None.
–None
– A-Weighing
– CCIR 1k wtd
– CCIR 2k wtd
– C-Message
–CCITT
– 400 Hz