Keysight U8903B - 8 Hp8903 B

Keysight U8903B
Performance Audio Analyzer
User’s Guide
8 HP8903B
HP8903B 408
Measurement 410
Generator 412
Sweep 413
Special function code list 414
SPCL 416
This chapter describes the various configurations for the HP8903B mode..
NOTE
The HP8903B mode is only available when GPIB is initialized successfully. Entering or
exiting the HP8903B mode will cause the system to reset. Some of the SCPI commands for
the active channel of the analog analyzer and analog generator that work in the standard
view mode will not work in the HP8903B mode.