7 Test Sequence Application
316 Keysight U8903B User’s Guide
Frequency
Frequency measurement provides a single value frequency measurement of the strongest
component in the output signal of each DUT channel. The frequency measurement settings
allows you to configure the signal generation settings and signal analysis settings.
The result for the frequency measurement for all the selected channels are displayed in a
bar chart (Frequency). Refer to “Measurement Results” on page 399 for more information
on the respective result menu page. Use the arrow keys to navigate through the respective
tabs and to display the menu page.
Signal generation
The frequency signal generation settings menu page is displayed as shown in Figure 7-19.
Figure 7-19 Frequency > Signal Generation settings menu page
The signal generation is disabled if None is selected for the output configuration channel.
To Next Page
Loading...
