Test Sequence Application 7
Keysight U8903B User’s Guide 399
Measurement Results
The test sequence application allows you to display the measurement results in a bar chart
or graph.
Bar chart
An example of the bar chart result menu page is displayed as shown in Figure 7-61.
Figure 7-61 AC Level > Settings > Result (AC level) menu page
Table 7-59 TSA > Project > Test > Measurement > Settings > Result (bar chart) menu description
Menu Description
Enable Press the Enable softkey to enable or disable the selected result tab.
Add Resul t Press the Add Result softkey to add a new result tab to the measurement.
Delete Result Press the Delete Result softkey to delete the selected result tab from the measurement.
Save Data
Press the Save Data softkey to save the selected result data to a CSV file format in the internal storage or external USB
flash storage. Refer to “Save” on page 94 for the Save menu page.
To Next Page
Loading...
