7 Test Sequence Application
398 Keysight U8903B User’s Guide
Degraded
Press the Degraded softkey to set the degraded source configuration.
–Source
Select the degraded source.
–File
Use the Degraded File as the comparison file.
–Analyzer
Use the Analyzer recording as the comparison file.
– Degraded File
Set the degraded file as the comparison file. This setting is only available when Source is set to File.
– Rec Channel
Set the channel number to be recorded from. This setting is only available when Source is set to Analyzer.
–Rec Duration
Set the recording duration to be recorded. This setting is only available when Source is set to Analyzer.
–Rec Step
Set the start recording type. This setting is only available when Source is set to Analyzer.
–Auto
Start the recording automatically.
– Delay
Start the recording after a delay.
–Prompt
Start the recording after the user presses the Enter key to proceed in the confirmation prompt.
– Rec Delay
Set the delay time before a recording is performed. This setting is only available when Source is set to Analyzer and Rec
Step is set to Delay.
– Rec to File
Enable or disable exporting the recording function. This setting is only available when Source is set to Analyzer.
–Yes
Export the recording to the file path specified in Rec File.
–No
Do not export the recording.
–Rec File
Set the file path for the exported recording destination. This setting is only available when Source is set to Analyzer and
Rec To File is set to Yes.
IO Config
Press the IO Config softkey to set the IO configuration.
– Output Level
Set the output level value.
Show/Hide POLQA
License
Press the Show/Hide POLQA License softkey to show or hide the POLQA license information.
Table 7-58 Voice Quality > Signal Generation and Analysis settings menu description (continued)
Menu Description
To Next Page
Loading...
