Keysight U8903B - Appendix 7: Analog Analyzer Menu Tree; Table A-7 Analog Analyzer Menu Tree Description

A Appendixes
450 Keysight U8903B User’s Guide
Appendix 7: Analog Analyzer Menu Tree
Table A-7 Analog analyzer menu tree description
Level 1 Level 2 Level 3 Description
Functions
Multi-Chn
–Off
– Phase
–X-Talk
Select the multichannel mode.
Function No.
–1
–2
–3
–4
Select the active function number to configure the settings.
Meas. Func.
–None
– Frequency
–AC Voltage
–DC Voltage
– THD+N Ratio
– THD+N Level
–SINAD
– THD Ratio
– THD Level
– SMPTE IMD
– DFD60268 2nd
– DFD 60268 3rd
– DFD 60118 2nd
– DFD 60118 3rd
–SNR
–SNR (Fast)
–J-Test
Select the measurement function.
This setting is only available when the multichannel mode is set to Off.
Functions
(Frequency)
Unit
–Hz
– ΔHz
Select the unit type.
Format
–Off
–Delta
Select the reading format of the returned measurement reading.
Set result as ref. from Channels 1 to 8
Store the measurement result from the selected channel as the reference
frequency.
Ref. Freq Set the reference frequency value.