Keysight U8903B - Appendix 5: Digital Generator Menu Tree; Table A-5 Digital Generator Menu Tree Description

A Appendixes
432 Keysight U8903B User’s Guide
Appendix 5: Digital Generator Menu Tree
Table A-5 Digital generator menu tree description
Level 1 Level 2 Level 3 Level 4 Description
Waveform
–Sine
– V. Phase
–Dual
– SMPTE 1:1
– SMPTE 4:1
– SMPTE 10:1
– IEC 60118
– IEC 60268
– Gaus. Noise
–Rect. Noise
– Tri. Noise
– Pink Noise
– Square
– Sine Burst
–Stereo
– Monotonicity
– Constant
–Walking Zero
–Walking One
– Multitone
– Arbitrary
Select the waveform type.
Waveform Config
(Sine)
Amplitude Set the signal amplitude value.
Frequency Set the signal frequency value.
DC Offset Set the signal DC offset value.
Waveform Config
(V. Phase)
Amplitude Set the signal amplitude value.
Frequency Set the signal frequency value.
Phase -> 1
This is only available when the digital generator is
in channel 2.
Set the phase of the channel 2 sine waveform with
reference to channel 1.