Keysight U8903B - Table 5-8 Graph Analysis > Harm Settings Menu Description (Harmonics Display)

5Graph Analysis
274 Keysight U8903B User’s Guide
Press the Harm Settings softkey to configure the harmonics settings. This setting is only
available when the graph analysis display option is Harmonics.
Figure 5-13 Graph Analysis > Harm Settings menu page (Harmonics display)
Table 5-8 Graph Analysis > Harm Settings menu description (Harmonics display)
Menu Description
Active Press the Active softkey to select the active channel.
Odd
Press the Odd softkey to select the odd harmonics.
–ALL
–3
–5
–7
–9
Even
Press the Even to select the even harmonics.
–ALL
–2
–4
–6
–8
Display
Press the Display softkey to select the type of harmonic analysis data to be displayed.
–Harmonics
– THD
THD unit
Press the THD unit softkey to select the unit for THD measurements.
–dB
–%