5Graph Analysis
270 Keysight U8903B User’s Guide
Persistence
Figure 5-7 Graph Analysis > Trace Settings > Persistence menu page
Table 5-7 Graph Analysis > Trace Settings > Persistence menu description
Menu Description
Persist
Press the Persist softkey to enable or disable persistence on the active trace. Persistence allows you to view the previous
sets of trace data in the graph before they are removed. The previous trace data will be displayed in a lighter shade color of
the active trace to distinguish between the previous and updated trace data.
Persist Count
Press the Persist Count softkey to set the number of previous sets of trace data to be displayed in the graph before they are
removed. For example, a value of 5 indicates that up to a total of 5 previous sets of trace data will be displayed in the graph
before they are removed.
This setting is only available when persistence is enabled.
To Next Page
Loading...
