Keysight U8903B - Special Function Code List; Table 8-6 HP8903 B Special Function Code List Description

8 HP8903B
414 Keysight U8903B User’s Guide
Special function code list
Select Code List in the HP8903B menu page to display the list of supported HP8903B
special function codes. The special function codes will be displayed in the lower main
display as shown in Figure 8-5. Press the up or down arrow keys to scroll up or down the
selected special function code list respectively. The HP8903B special function code are as
listed in Table 8-6.
Figure 8-5 HP8903B > Code List menu page (Input Level Range (except DC Level))
Table 8-6 HP8903B special function code list description
Special function Code Description
Input Level Range (except DC Level)
1.0
1.3
1.4 ~ 1.5
1.6 ~ 1.8
1.9 ~ 1.10
1.11 ~ 1.13
1.14 ~ 1.15
1.16 ~ 1.19
Auto range
140 V range
100 V range
32 V range
10 V range
3.2 V range
1 V range
0.32 V range
Input Level Range (DC Level only)
2.0
2.2
2.3
2,4
Auto Range
100 V range
32 V range
10 V range
Post Notch Detector Response (except in SINAD) 5.0 ~ 5.1 RMS Detector
Display Source Settings 10.0 Activate the generator menu.
Re-enter Ratio Mode
11.0
11.1
Restore last RATIO reference and enter RATIO
mode if allowed
Display RATIO reference (measurement menu will
be activated)