Keysight U8903B - Figure 3-43 Digital Generator > Waveform Config Menu Page (Walking Zero); Table 3-20 Digital Generator > Waveform Config Menu Description (Walking Zero); Walking Zero

3 Audio Generator Functions
130 Keysight U8903B User’s Guide
Walking zero
In walking zero waveform mode, one bit is set to 0 and the rest of the bits are set to 1. The
bit 0 is continuously incremented from the least significant bit (LSB) to the most significant
bit (MSB) and loops back to the LSB.
Walking zero waveform mode is applicable for the digital generator only. The waveform
configuration for walking zero waveform is displayed as shown in Figure 3-43.
Figure 3-43 Digital Generator > Waveform Config menu page (walking zero)
Table 3-20 Digital Generator > Waveform Config menu description (walking zero)
Menu Description
Samples/Step Samples/Step refers to the speed the single bit 0 is incremented.