Keysight U8903B - Figure 1-6 System > Update Menu Page; Table 1-6 System > Update Menu Page; Update the U8903 B

1 Getting Started
46 Keysight U8903B User’s Guide
Update the U8903B
The U8903B firmware update file can be obtained from the Keysight U8903B firmware
update website at www.keysight.com/find/audioanalyzer_firmware.
Perform the following procedure to update the U8903B firmware.
1 Save the firmware update files in an external USB flash storage.
2 Connect the external USB flash storage to the U8903B.
3 Press on the SYSTEM panel.
4 From the System menu page, press the Update softkey. The Update menu page is
displayed as shown in Figure 1-6.
Figure 1-6 System > Update menu page
5 Press the Load File softkey and the recall menu page is displayed to enable you to select
the source location.
6 Select the firmware file to be updated, and press the Recall softkey as shown in
Figure 1-7. Refer to “Recall” on page 95 for more information on the Recall menu page.
Table 1-6 System > Update menu page
Menu Description
Load File
Press the Load File softkey to load the update files. The Recall menu page will be displayed to select the source location.
Refer to “Recall” on page 95 for more information on the Recall menu page.
EULA Press the EULA softkey to display the U8903B EULA (End User License Agreement) page.