Audio Analyzer Measurement Functions 4
Keysight U8903B User’s Guide 177
Table 4-2 Digital Analyzer menu description
Menu Description
Meas Mode
Press the Meas Mode softkey to select the measurement mode. Refer to “Measurement mode (Digital Analyzer)” on
page 179 for more information.
– Standard
–Process Delay
–BERT
Unit
This is only available when the measurement mode is BERT.
Press the Unit softkey to select the unit for the BERT measurement mode.
–Hex
–Dec
Functions
This is only available when the measurement mode is Standard.
Press the Functions softkey to configure the analog analyzer functions. Refer to “Functions” on page 182 for more
information.
Filters Config
This is only available when the measurement mode is Standard.
Press the Filters Config softkey to set the filters configuration. Refer to “Filters Configuration (Digital Analyzer)” on
page 234 for more information.
Meas Config
This is only available when the measurement mode is Standard.
Press the Meas Config softkey to set the measurement configuration. Refer to “Measurement Configuration (Digital
Analyzer)” on page 240 for more information.
Input Config
Press the Input Config softkey to set the input configuration. Refer to “Input Configuration (Digital Analyzer)” on
page 248 for more information.
DSI Config
Press the DSI Config softkey to set the DSI input configurations such as the format, resolution, and others. Refer to “DSI
Input Configuration (Digital Analyzer)” on page 251 for more information.
AES/SPDIF
Press the AES/SPDIF softkey to set the AES3/SPDIF input configurations such as the decoding, resolution, and others.
Refer to “AES/SPDIF Input Configuration (Digital Analyzer)” on page 253 for more information.
Bits Analysis
Press the Bits Analysis softkey to set the bits analysis configuration. Refer to “Bits Analysis (Digital Analyzer)” on
page 254 for more information.
Statistics Press the Statistics softkey to configure the statistics settings. Refer to “Statistics” on page 257 for more information.
To Next Page
Loading...
