Audio Analyzer Measurement Functions 4
Keysight U8903B User’s Guide 175
Audio Analyzer
Press on the FUNCTION panel to switch between audio generator or audio analyzer
mode. The Analog Analyzer menu page, Digital Analyzer menu page, and Bluetooth
Analyzer menu page are displayed as shown in Figure 4-1, Figure 4-2, and Figure 4-3
respectively.
Press on the FUNCTION panel to switch between analog and digital interface.
Press or on the CHANNEL/DATA panel to switch to channel 1 or channel 2
respectively, and start configuring the active channel.
The U8903B can also be expanded with additional analog analyzer channels. Refer to
“U8903B Options” on page 37 for more information.
Press on the RUN CONTROL panel to start or stop the measurements for the
selected analyzer channel.
Figure 4-1 Analog Analyzer menu page
To Next Page
Loading...
