4 Audio Analyzer Measurement Functions
256 Keysight U8903B User’s Guide
Figure 4-69 Bluetooth Analyzer > Wave File menu page
Table 4-36 Analog/Digital/Bluetooth Analyzer > Wave File menu description
Menu Description
Channel
Press the Channel softkey to select the wave file channel type.
–Left
Selecting Left will record the present analyzer channel 1 signal into a mono wave file.
–Right
Selecting Right will record the present analyzer channel 2 signal into a mono wave file.
–Stereo
Selecting Stereo will record both the present analyzer channel 1 and channel 2 signals into a stereo wave file.
Bits/Sample
Press the Bits/Sample softkey to select the wave file bits per sample.
–8
–16
–24
Duration Press the Duration softkey to set the recording duration of the wave file.
Record
Press the Record softkey to start recording and save the measurement into a wave file. Refer to “Save” on page 94 for
more information on the Save menu page.
To Next Page
Loading...
