Keysight U8903B - Axis Settings; Table 6-5 Sweep > Plot View > Axis Settings Menu Description

6 Sweep Function
286 Keysight U8903B User’s Guide
Axis settings
Figure 6-6 Sweep > Plot View > Axis Settings menu page
Table 6-5 Sweep > Plot View > Axis Settings menu description
Menu Description
Active Axis
Press the Active Axis softkey to select the active axis.
– Primary
–Secondary
Left Press the Left softkey to set the left axis value.
Right Press the Right softkey to set the right axis value.
Top Press the Top softkey to set the top axis value.
Bottom Press the Bottom softkey to set the bottom axis value.
X-Scale
Press the X-Scale softkey to set the X-axis scale type.
– Linear
–Log
Y-Scale
Press the Y-Scale softkey to set the Y-axis scale type.
– Linear
–Log