Keysight U8903B - Figure 3-58 Digital Generator > Output Config > Ref Clock Menu Page; Reference Clock; Table 3-30 Digital Generator > Output Config > Ref Clock Menu Description

3 Audio Generator Functions
144 Keysight U8903B User’s Guide
Reference clock
Figure 3-58 Digital Generator > Output Config > Ref Clock menu page
Table 3-30 Digital Generator > Output Config > Ref Clock menu description
Menu Description
Source
Press the Source softkey to select the reference clock source. Refer to “Append ix 20: Digital System Clock
Distribution Block Diagram” on page 565 for more information on the system clock.
– Internal
– AES RCLK
–External
Type
Press the Type softkey to select the external reference clock source. Refer to “Appendix 20: Digital System Clock
Distribution Block Diagram” on page 565 for more information on the system clock.
–MCLK
–FSYNC
Word Length
Press the Word Length softkey to set the external reference clock word length value.
– 8 to 32
Multiplier
Press the Multiplier softkey to set the external reference clock multiplier value. The selection available in the external
reference clock multiplier depends on the external reference clock word length.