Appendixes A
Keysight U8903B User’s Guide 581
Appendix 23: Relationship between Digital Waveform Parameters
and Channels
Table A-47 Relationship between digital waveform parameters and channels
Waveform Parameter Channel
Sine
Frequency
Amplitude
DC Offset
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 can be different
Channel 1 and Channel 2 are the same
Stereo
Frequency
Amplitude
DC Offset
Channel 1 and Channel 2 can be different
Channel 1 and Channel 2 can be different
Channel 1 and Channel 2 are the same
Square
Frequency
Amplitude
DC Offset
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 can be different
Channel 1 and Channel 2 are the same
Sine burst
Frequency
Amplitude
Burst On
Period
Low Level
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 can be different
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Variable phase
Frequency
Amplitude
Phase -> 1
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 can be different
Channel 1 and Channel 2 are the same
Dual
Frequency 1
Frequency 2
Amplitude
Ratio
DC Offset
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
SMPTE IMD 1:1/ 4:1/ 10:1
Lower Frequency
Upper Frequency
Amplitude
DC Offset
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
DFD IEC 60118
Difference Frequency
Upper Frequency
Amplitude
DC Offset
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
DFD IEC 60268
Difference Frequency
Center Frequency
Amplitude
DC Offset
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Channel 1 and Channel 2 are the same
Gaussian/Rectangular/
Triangular/Pink
Amplitude
DC Offset
Channel 1 and Channel 2 can be different
Channel 1 and Channel 2 are the same
Constant Amplitude Channel 1 and Channel 2 are the same
To Next Page
Loading...
