Keysight U8903B - Properties; Table 7-62 TSA > Report > Properties Menu Description

7 Test Sequence Application
404 Keysight U8903B User’s Guide
Properties
Figure 7-64 TSA > Report > Properties menu page
Table 7-62 TSA > Report > Properties menu description
Menu Description
Auto Save Press the Auto Save softkey to enable or disable saving the report automatically at the end of a test sequence.
Format
Press the Format softkey to select the report file format to be saved.
–Docx
–Html
Name Option
Press the Name Option softkey to select the naming convention of the file name for the automatically saved report.
–Timestamp
Save the report in a time stamp suffix file name.
–Numeric
Save the report in a numerical suffix file name that increments with each save.
–Prompt
Prompts for the file name at the end of a test sequence.
Prefix Press the Prefix softkey to set the prefix for the file name.
Location
Press the Location softkey to select the folder for the automatically saved report. Refer to “Location” on page 405 for
more information.