Audio Generator Functions 3
Keysight U8903B User’s Guide 137
Figure 3-53 Bluetooth Generator > Waveform Config > Custom menu page 1 (multitone waveform)
Table 3-24 Analog/Digital/Bluetooth Generator > Waveform Config > Custom menu description (multitone waveform)
Menu Description
Apply Press the Apply softkey to apply the current setting on the selected tone for the custom multitone waveform.
Optimize Press the Optimize softkey to optimize the crest factor for the custom multitone waveform.
Frequency Press the Frequency softkey to set the frequency value for the custom multitone waveform.
Amplitude Press the Amplitude softkey to set the amplitude value for the custom multitone waveform.
Phase Press the Phase softkey to set the phase value for the custom multitone waveform.
Add Above Press the Add Above softkey to add the tone above the selected tone for the custom multitone waveform.
Add Below Press the Add Below softkey to add the tone below the selected tone for the custom multitone waveform.
Remove Press the Remove softkey to remove the selected tone for the custom multitone waveform.
Clear Press the Clear softkey to clear all the tones in the custom multitone waveform list.
To Next Page
Loading...
