Audio Generator Functions 3
Keysight U8903B User’s Guide 147
Device scan
Figure 3-61 Bluetooth Analyzer > Link Config > Device Scan menu page
Table 3-33 Bluetooth Analyzer > Link Config > Device Scan menu description
Menu Description
Device Search Press the Device Search softkey to begin identifying all the discoverable Bluetooth devices within range.
Max Scan
Press the Max Scan softkey to set the maximum number of discoverable Bluetooth devices to be identified during the
Device Search procedure. The Device Search procedure will stop when the identified Bluetooth devices reached the set
number or if more than 30 s elapsed.
–1 to 16
Filter Class
Press the Filter Class softkey to select the Bluetooth device class to be used during the Device Search procedure. The
Device Search procedure identifies all the discoverable Bluetooth device based on the selected class.
–All
Search for all available Bluetooth device class.
– Custom
Manually sets the Bluetooth device class using the 6-digit hexadecimal numeric number of the Bluetooth device
address such as 60020C for smartphones and 240408 for handsfree/headset devices.
Custom
Only available if Filter Class is set to Custom.
Press the Custom softkey to manually sets the Bluetooth device class.
Refresh Device Press the Refresh Device softkey to refresh the friendly name of the selected Bluetooth device.
To Next Page
Loading...
