Keysight U8903B - Table 4-37 Analog;Digital;Bluetooth Analyzer > Statistics Menu Description

4 Audio Analyzer Measurement Functions
258 Keysight U8903B User’s Guide
Figure 4-72 Bluetooth Analyzer > Statistics menu page
Table 4-37 Analog/Digital/Bluetooth Analyzer > Statistics menu description
Menu Description
Show Stats Press the Show Stats softkey to enable or disable the statistics calculation.
No. of Reading Press the No. of Reading softkey to set the number of readings used for the statistics calculation.
Stat 1
Stat 2
Stat 3
Press the respective softkeys to select the statistics calculation type. The U8903B allows you to display three types of
statistics data.
–Min
The minimum value obtained in the measurement.
–Max
The maximum value obtained in the measurement.
–Average
The calculated average value on the number of measurement readings captured.
– Std Dev
The calculated standard deviation value on the number of measurement readings captured.
– ΔMinMax
The difference between the maximum value and minimum value.
The number of measurement readings is the value set in No. Of Readings.
Clear Press the Clear softkey to reset the statistics results of the current analog and Bluetooth analyzer.