Test Sequence Application 7
Keysight U8903B User’s Guide 345
Signal analysis
The multitone analyzer signal analysis settings menu page is displayed as shown in
Figure 7-36.
Figure 7-36 Multitone Analyzer > Signal Analysis settings menu page
Table 7-35 Multitone Analyzer > Signal Analysis settings menu description
Menu Description
Input Range
Press the Input Range softkey to configure the input range settings.
– Track 1st Ch
If Track 1st Ch is enabled, all the other channels will be set to follow the channel 1 range setting. Any changes made to
channel 1 range setting will be reproduced in the other channels. Disable the Track 1st Ch to set the individual
channels.
– Voltage Range
Set the input voltage range.
To Next Page
Loading...
