Audio Analyzer Measurement Functions 4
Keysight U8903B User’s Guide 255
Wave File (Analog, Digital, and Bluetooth Analyzer)
The U8903B allows you to record and save the input measurement signal into a wave file.
The recorded wave file can be used as a test signal. The wave file settings for analog,
digital, and Bluetooth analyzer is displayed as shown in Figure 4-67, Figure 4-68, and
Figure 4-69 respectively.
Figure 4-67 Analog Analyzer > Wave File menu page
Figure 4-68 Digital Analyzer > Wave File menu page
It is recommended to use fixed input range for analog wave file saving to ensure that the
recorded signal’s amplitude is closer to the measured signal. The selected range should be
close to the measured signal's amplitude.
To Next Page
Loading...
