Audio Generator Functions 3
Keysight U8903B User’s Guide 101
Figure 3-3 Bluetooth Generator menu page
Table 3-3 Bluetooth Generator menu description
Menu Description
Waveform
Press the Waveform softkey to display the list of available Bluetooth generator waveform types. Select the desired
waveform from the drop-down list.
Waveform Config
Press the Waveform Config softkey to set the current active waveform configuration such as frequency, amplitude, and
others. Refer to “Waveform Configuration” on page 102 for more information.
Link Config
Press the Link Config softkey to set the link configurations such as device scan, A2DP settings, and others. Refer to “Link
Configuration (Bluetooth Generator)” on page 146 for more information.
References
Press the References softkey to configure the output references settings that are used in the unit conversion. Refer to
“References (Digital and Bluetooth Generator)” on page 172 for more information.
To Next Page
Loading...
