Keysight U8903B - Appendix 8: Digital Analyzer Menu Tree; Table A-8 Digital Analyzer Menu Tree Description

A Appendixes
462 Keysight U8903B User’s Guide
Appendix 8: Digital Analyzer Menu Tree
Table A-8 Digital analyzer menu tree description
Level 1 Level 2 Level 3 Level 4 Description
Meas Mode
– Standard
– Process Delay
–BERT
Select the analysis mode.
Unit
–Hex
–Dec
This is only available when the analysis mode is
BERT.
Select the unit for the BERT analysis mode.
Functions
Multi-Chn
–Off
– Phase
–X-Talk
Select the multichannel mode.
Function No.
–1
–2
–3
–4
Select the active function number to configure the
settings.
Meas Func
–None
– Frequency
–AC Voltage
–DC Voltage
– THD+N Ratio
– THD+N Level
–SINAD
– THD Ratio
– THD Level
– SMPTE IMD
– DFD60268 2nd
– DFD 60268 3rd
– DFD 60118 2nd
– DFD 60118 3rd
– Positive Peak
– Negative Peak
Select the measurement function.
This setting is only available when the
multichannel mode is set to Off.
Functions
(Frequency)
Unit
–Hz
– ΔHz
Select the unit type.
Format
–Off
–Delta
Select the reading format of the returned
measurement reading.
Set result as ref. from Channels 1 to 8
Store the measurement result from the selected
channel as the reference frequency.
Ref. Freq Set the reference frequency value.