Appendixes A
Keysight U8903B User’s Guide 461
Input Config
Bandwidth
–90 kHz
– 1.5 MHz
Select the input bandwidth value.
This setting is only available with Option N3431A. Refer to “U8903B
Options” on page 37 for more information.
Coupling
–DC
–AC
Select the input coupling type.
Ext. Gain Set the input external gain value.
Wave File
Channel
–Left
–Right
–Stereo
Select the wave file channel type.
Bits/Sample
–8
–16
–24
Select the wave file number of bits per sample.
Duration 1 s to 600 s Set the recording duration of the wave file.
Record Start recording and save the measurement into a wave file.
Statistics
Show Stats
–On
–Off
Enable or disable the statistics calculation.
No. of Reading 2 to 20 Set the number of readings used for the statistics calculation.
Stat 1
Stat2
Stat3
–Min
–Max
–Average
– Std Dev
– ΔMinMax
Select the statistics calculation type.
Clear Reset the statistics results of the current analog analyzer.
Table A-7 Analog analyzer menu tree description (continued)
Level 1 Level 2 Level 3 Description
To Next Page
Loading...
