Keysight U8903B - Device Action; Figure 3-62 Bluetooth Analyzer > Link Config > Device Action Menu Page; Table 3-34 Bluetooth Analyzer > Link Config > Device Action Menu Description

3 Audio Generator Functions
148 Keysight U8903B User’s Guide
Device action
Figure 3-62 Bluetooth Analyzer > Link Config > Device Action menu page
Table 3-34 Bluetooth Analyzer > Link Config > Device Action menu description
Menu Description
Pair/Unpair Device
Press the Pair/Unpair Device softkey to pair with the selected discovered Bluetooth device or unpair with the selected
paired Bluetooth device respectively.
Unpair All Device Press the Unpair All Device softkey to unpair all the paired Bluetooth devices.
Profile Connection
Press the Profile Connection softkey to connect or disconnect the Bluetooth profiles for the connection.
– Connect/Disconnect All
– Connect/Disconnect A2DP
– Connect/Disconnect HFP
– Connect/Disconnect AVRCP
A2DP Operation
Press the A2DP Operation softkey to select the advanced audio distribution profile operation settings. This is only
available if the A2DP profile is connected.
– Open Media Connection
Establishes the audio media connection to the connected Bluetooth device via the A2DP profile.
– Close Media Connection
Disconnects the audio media connection to the connected Bluetooth device via the A2DP profile.
–Start Streaming
Starts or resumes the audio media connection to the connected Bluetooth device.
– Pause Streaming
Stops or pauses the audio media connection to the connected Bluetooth device.