Keysight U8903B - Filters Configuration (Analog Analyzer); Table 4-22 Analog Analyzer > Filter Config Menu Description

Audio Analyzer Measurement Functions 4
Keysight U8903B User’s Guide 231
Filters Configuration (Analog Analyzer)
Filters are used to bandwidth limit the input signals before applying a measurement
function. The filter configuration for the analog analyzer is displayed as shown in
Figure 4-51.
Figure 4-51 Analog Analyzer > Filter Config menu page
Table 4-22 Analog Analyzer > Filter Config menu description
Menu Description
Clear Filters Press the Clear Filters softkey to clear all the filter settings.
LPF
Press the LPF softkey to select the low-pass filter.
–None
–2 kHz
–3 kHz
–5 kHz
–8 kHz
–10 kHz
–15 kHz
–20 kHz
–22 kHz
–30 kHz
–40 kHz
–50 kHz
–80 kHz
– Custom (Refer to “Appendix 18: User-defined Filter File Format” on page 561 for more information.)