Keysight U8903B - Measurements; Table 7-14 TSA > Project > Test > Measurement Menu Description

7 Test Sequence Application
310 Keysight U8903B User’s Guide
Measurements
The U8903B allows up to 20 results in a single measurement. You can move a selected
measurement within the same test sequence. An example of the measurement menu page
is displayed as shown in Figure 7-15.
Figure 7-15 TSA > Project > Test > AC Level menu page
Table 7-14 TSA > Project > Test > Measurement menu description
Menu Description
Enable
Press the Enable softkey to enable or disable the selected measurement. The check box for the measurement will be
selected when enabled.
Add Measurement Press the Add Measurement softkey to add measurements.
Delete Measurement Press the Delete Measurement softkey to delete the selected measurement.
Edit
Press the Edit softkey to move or copy the selected measurement, or paste a copied measurement after the selected
measurement.