Audio Analyzer Measurement Functions 4
Keysight U8903B User’s Guide 253
AES/SPDIF Input Configuration (Digital Analyzer)
The AES/SPDIF input configuration for digital analyzer is displayed as shown in
Figure 4-65.
Figure 4-65 Digital Analyzer > AES Config menu page 1
Table 4-34 Digital Analyzer > AES Config menu description
Menu Description
Decoding
Press the Decoding softkey to select the decoding format.
– Linear PCM
–A- Law
– μ- Law
Resolution
Press the Resolution softkey to set the audio resolution value.
–8 to 24
Status Bits
Press the Status Bits softkey to select the status bits type.
– Channel
–User
Save in Hex
Press the Save in Hex softkey to save the status bits to a HEX file. Refer to “Save” on page 94 for more information on the
Save menu page.
Save in Xml
Press the Save in Xml softkey to save the status bits to an XML file. Refer to “Save” on page 94 for more information on
the Save menu page.
To Next Page
Loading...
