Keysight U8903B - Figure 2-18 Scale Menu Page; Scale; Table 2-10 Scale Menu Description

2 Operation and Features
74 Keysight U8903B User’s Guide
Scale
The Scale menu page allows you to perform autoscaling to automatically scale the display
according to the signal, or to autoscale the X-axis or Y-axis.
Figure 2-18 Scale menu page
NOTE
The Scale menu page is only available in the graph analysis mode.
Table 2-10 Scale menu description
Menu Description
AutoScale Press the AutoScale softkey to perform autoscaling on the X-axis and Y-axis.
AutoScale X
Press the AutoScale X softkey to perform autoscaling on the X-axis by searching for the most optimum scale (left and right
values) for the X-axis based on the data being displayed in the graph.
AutoScale Y
Press the AutoScale Y softkey to perform autoscaling on the Y-axis by searching for the most optimum scale (top and
bottom values) for the Y-axis based on the data being displayed in the graph.