Keysight U8903B - Table A-20 Measurement Settings > DC Level Menu Tree Description

A Appendixes
512 Keysight U8903B User’s Guide
DC level
Table A-20 Measurement settings > DC Level menu tree description
Tab Level 1 Level 2 Level 3 Description
DC Level
(Signal Generation)
Waveform
–Sine
– Arbitrary
Select the waveform type.
Output Select the output channel.
Waveform Config
Track 1st Ch
–Enable
– Disable
Enable or disable the tracking of the first channel.
Frequency Set the frequency value.
Amplitude Set the amplitude value.
DC Offset Set the DC offset value.
DC Level
(Signal Analysis)
Sample Size
– 2048
– 4096
– 8192
– 16384
– 32768
– 65536
– 131072
– 262144
– 524288
–1M
–2M
Select the number of samples to be acquired for
the measurement.
Input Range
Auto Range
–On
–Off
Enable or disable the auto input range.
Track 1st Ch
–Enable
– Disable
Enable or disable the tracking of the first channel.
Voltage Range Set the input voltage range.
DC Level
Refer to “Bar chart” on page 548 for the bar
chart menu tree.