7 Test Sequence Application
294 Keysight U8903B User’s Guide
Press to start or stop the test sequence. The Test Application menu page will
be displayed as shown in Figure 7-2.
Figure 7-2 Test Application menu page
Table 7-1 Test Application menu description
Menu Description
Start Test App Press the Start Test App softkey to start the test application project.
Start Test App From Here
Press the Start Test App From Here softkey to start the test application from the selected test or measurement tab.
This setting is only available when the On/Off key is pressed with the test or measurement tab selected.
Start Selected
Measurement
Press the Start Selected Measurement softkey to start the test for the selected measurement.
This setting is only available when the On/Off key is pressed with the measurement tab selected.
To Next Page
Loading...
