Keysight U8903B - Table 8-1 U8903 B LCD Display Description

HP8903B 8
Keysight U8903B User’s Guide 409
Table 8-1 U8903B LCD display description
Item Description
1 SINAD meter Display the SINAD measurement mode readings.
2 Analyzer panel
Display the measurement results. The left panel reading shows the frequency result while the
right panel reading shows the result of the selected measurement modes. Refer to
“Measurement” on page 410 for the available measurement modes.
3 Generator panel
Display the frequency and amplitude values of the sine waveform. The highlighted generator
parameter label in red indicates the current increment parameter. You can use the up or down
arrow keys to increment/decrement the current parameter value according to the parameter
step value. Refer to “Generator” on page 412 for more information.
4 Measurement setting panel Display the current measurement settings in red.
5 HP8903B settings panel
Display the current setting for input range, detector, impedance, and sweep points. If the auto
range is selected, the input range parameter will be highlighted in red.