Keysight U8903B - Measurement 1;Measurement 2; Table 5-10 Graph Analysis > Measurement > Measurement 1;Measurement 2 Menu

Graph Analysis 5
Keysight U8903B User’s Guide 277
Measurement 1/Measurement 2
Figure 5-16 Graph Analysis > Measurement > Measurement 1 menu page
Table 5-10 Graph Analysis > Measurement > Measurement 1/Measurement 2 menu description
Menu Description
Interface
Press the Interface softkey to select the measurement interface type.
– Analog Analyzer
– Digital
–Bluetooth
Channel Press the Channel softkey to select the desired channel to perform the measurement.
Function No
Press the Function No softkey to select the function to be displayed based on the function number (1 to 4). The function
number corresponds to the respective measurement functions in the analyzer. The allowable measurement functions are
as follows.
– Frequency
–DC voltage
–THD ratio
–THD level