Keysight U8903B - Page 152

3 Audio Generator Functions
152 Keysight U8903B User’s Guide
Connectable
Press the Connectable softkey to enable or disable the connectability function of the U8903B’s Bluetooth card by a remote
device.
Loopback
Press the Loopback softkey to enable or disable the integrated interchip sound (I2S) audio loopback function. This is only
available if the HFP profile is connected.
Link Status
Press the Link Status softkey to enable or disable the link status of the U8903B’s Bluetooth card. This is only available if
the HFP profile or A2DP profile is connected.
RF Port
Press the RF Port softkey to select the U8903B’s Bluetooth card RF port connector.
–RF1
–RF2
Table 3-35 Bluetooth Analyzer > Link Config > Common Settings menu description (continued)
Menu Description