Audio Analyzer Measurement Functions 4
Keysight U8903B User’s Guide 243
Sync Average
– Press the Sync Average softkey to set the number of points for the synchronous averaging in the analyzer meter mode.
Synchronous averaging reduces noise levels by averaging the acquired data.
–1 to 64
Src Channel
Press the Src Channel to select the internal generator channel as the reference channel used in the following situations.
– For the result calculation in unit dBg.
– For the frequencies searching algorithm when the frequency lock is set to Gen Lock.
Trigger
Press the Trigger softkey to configure the trigger settings. Refer to “Trigger (Analog, Digital, and Bluetooth
Analyzer)” on page 244 for more information.
Table 4-29 Bluetooth Analyzer > Meas Config menu description (continued)
Menu Description
To Next Page
Loading...
