Keysight U8903B - Page 393

Test Sequence Application 7
Keysight U8903B User’s Guide 393
LPF
Press the LPF softkey to select the low-pass filter.
–None
–2 kHz
–3 kHz
–5 kHz
–8 kHz
–10 kHz
–15 kHz
–20 kHz
–22 kHz
–30 kHz
–40 kHz
–50 kHz
–80 kHz
– Custom
HPF
Press the HPF softkey to select the high-pass filter.
–None
–15 Hz
–20 Hz
–22 Hz
–30 Hz
–50 Hz
–70 Hz
– 100 Hz
– 200 Hz
– 300 Hz
– 400 Hz
– Custom
Weighting
Press the Weighting softkey to select the weighting filter.
–None
–A
– CCIR 1k
– CCIR 2k
–CCITT
– C-Message
– Custom
Deemphasis
Press the Deemphasis softkey to select the de-emphasis filter.
–None
–50 μs
–75 μs
– Custom
Table 7-57 Measurement Recorder > Signal Analysis settings menu description (continued)
Menu Description