Keysight U8903B - Page 425

Appendixes A
Keysight U8903B User’s Guide 425
Utility
(if the mode is in
Graph Analysis mode)
Save Traces
Trace (x)
(x) = current trace
number
Save the active trace to a CSV file format.
Refer to “Appendix 12: Save Menu Tree” on
page 493 for the save menu tree.
All Traces
Save all traces state to a file.
Refer to “Appendix 12: Save Menu Tree” on
page 493 for the save menu tree.
Axis Settings
Save the axis settings state to a file.
Refer to “Appendix 12: Save Menu Tree” on
page 493 for the save menu tree.
Traces + Axis
Save all traces and axis settings states.
Refer to “Appendix 12: Save Menu Tree” on
page 493 for the save menu tree.
Save Trace (x) Data
(x) = current channel
Save the active trace data to a CSV file format.
Refer to “Appendix 12: Save Menu Tree” on
page 493 for the save menu tree.
Recall
Load a trace from a CSV file into the active trace.
Refer to “Appendix 13: Recall Menu Tree” on
page 494 for the recall menu tree.
Copy To
Copy the current channel graph state to other
channel(s).
Copy Graph From
Select a channel number to copy the graph state
to the current channel.
File Explorer Rename, delete, copy, or move files.
Help
(Shift + Utility)
Display the help mode.
Press Shift + Utility to close the help mode.
System
Error Info Load File
Select the log file to be loaded in the error log
viewing panel.
Refer to “Appendix 13: Recall Menu Tree” on
page 494 for the recall menu tree.
I/O
LAN Settings
Reset Reset the LAN settings.
Hostname Set the LAN hostname.
Config Mode
Select the LAN configuration mode.
–Auto
–Manual
IP Address Set the LAN IP address.
Subnet mask Set the LAN subnet mask address.
Gateway Set the LAN gateway address.
DNS 1 Set the LAN DNS 1 address.
DNS 2 Set the LAN DNS 2 address.
GPIB 0 to 30 Set the desired GPIB address.
Table A-3 SYSTEM panel menu tree description (continued)
Key Level 1 Level 2 Level 3 Description