Keysight U8903B - Page 448

A Appendixes
448 Keysight U8903B User’s Guide
Link Config
Common Settings
Profile
– A2DP SRC, HFP AG,
AVRCP TRGT
– A2DP SNK, HFP HF,
AVRCP CTRL
Select the U8903B’s Bluetooth card profile.
Friendly Name Set the friendly name of the U8903B’s Bluetooth card.
Device PIN Set the passkey of the U8903B’s Bluetooth card.
Device Class
–Auto
– Custom
Select the device class based on the configured profile.
Custom Set the device class.
SSP Mode
– Just Works
– Man-In-The-Middle
Select the U8903B’s Bluetooth card simple secure
pairing mode.
Auto Pair Enable or disable the auto-pairing function.
Discoverable
Enable or disable the discoverability function of the
U8903B’s Bluetooth card.
Connectable
Enable or disable the connectability function of the
U8903B’s Bluetooth card.
Loopback
Enable or disable the integrated interchip sound audio
loopback function.
Link Status
Enable or disable the link status of the U8903B’s
Bluetooth card.
RF Port
–RF1
–RF2
Select the U8903B’s Bluetooth card RF port connector.
A2DP Settings
Codec
–SBC
–apt-X
Select the codec for the A2DP profile.
Sampling Rate
– 16 kHz
– 32 kHz
– 44.1 kHz
– 48 kHz
Select the audio sampling rate for the A2DP profile.
Table A-6 Bluetooth generator menu tree description (continued)
Level 1 Level 2 Level 3 Level 4 Description