Appendixes A
Keysight U8903B User’s Guide 485
Link Config
HFP Settings
Wideband
Enable or disable the wideband speech mode in the HFP
profile connection.
Latency 4 to 65534 Set the HFP's codec channel latency in miliseconds.
Retransmit
– No Transmission
–Power Saving
– Link Quality
– No Preference
Select the HFP's codec retransmission effort.
Packet Types
–HV1
–HV2
–HV3
–EV3
–EV4
–EV5
–2EV3
–3EV3
–2EV5
–3EV5
Select the packet type used in the HFP’s codec.
AVRCP Log View
Clear Log Clear the AVRCP operation log history.
Refresh Log Refresh the AVRCP operation log history.
Wave File
Channel
–Left
–Right
–Stereo
– Select the wave file channel type.
Bits/Sample
–8
–16
– Select the wave file number of bits per sample.
Duration 1 s to 600 s Set the recording duration of the wave file.
Record
Start recording and save the measurement into a wave
file.
Statistics
Show Stats
–On
–Off
– Enable or disable the statistics calculation.
No. of Reading 2 to 20
Set the number of readings used for the statistics
calculation.
Stat 1
Stat2
Stat3
–Min
–Max
–Average
– Std Dev
– ΔMinMax
– Select the statistics calculation type.
Clear
Reset the statistics results of the current analog
analyzer.
Table A-9 Bluetooth analyzer menu tree description (continued)
Level 1 Level 2 Level 3 Level 4 Description
To Next Page
Loading...
