Operation and Features 2
Keysight U8903B User’s Guide 71
Movement
Press the Movement softkey to select the marker movement type.
–Single
The active marker will move depending on the speed and direction of the knob being turned.
–Pair
The active marker will move with the reference marker.
–Bin
The active marker will move to the next/previous bin or pixel regardless of the speed of the knob.
–Peak
The active marker will move from peak to peak. This behavior is affected by the peak threshold settings.
–Harmonic
The active marker will move from harmonic to harmonic. This setting is only useful if the display option is changed to
Harmonics.
Function
Press the Function softkey to select the marker function type.
–None
No marker function type is specified.
–Slope
The slope of the current marker. The beginning point and end point taken into account for the calculation is from the
previous and subsequent point of the marker.
–PSD
The total power contained in each of the frequency bins in the band, and then dividing the result by the “effective
bandwidth”.
Marker ->
Press the Marker -> softkey to perform automatic adjustment of the graph left and right values in reference to the current
marker location. Refer to “Marker ->” on page 72 for more information.
Harmonics
Press the Harmonics softkey to place the markers on the harmonic values.
Refer to “Harmonics” on page 73 for more information.
Rdg at Mkr
Press the Rdg at Mkr softkey to enable or disable the readings at the marker.
You can choose to have the active marker readings to be at the top left corner of the graph, or at the marker location itself.
When marker table is enabled, the marker readings at the marker location are automatically hidden.
Table 2-7 Marker menu description (continued)
Menu Description
To Next Page
Loading...
