TOS93 Series User’s Manual 271
System Settings | Displaying/Changing the Interface Settings
1
Press SYSTEM > Interface.
The interface setup screen appears.
2
Press Modify.
You can now edit the interface settings.
3
Use the rotary knob to select a setting, and then press Edit.
4
Use the numeric keypad or the rotary knob to select or enter a value, and then
press ENTER.
Change the interface settings by repeating step 3 and step 4 .
The changes are not applied at this point.
5
Press Apply.
A confirmation screen appears. To cancel, press ESCAPE.
6
Press ENTER.
This completes the setting.
To Next Page
