10
WARNING:
TO MINIMIZE THE RISK OF ELECTRIC SHOCK, YOU MUST NOT EXPOSE THIS
PRODUCT TO WET AND MOIST CONDITIONS AT ANY TIME.
All Lupus-Electronics products are lead-free and meet the requirements
stated under the European Directive on the Restriction of Hazardous
Substances (RoHS). This guarantees that the entire production process
and the product itself are free of lead and of all listed hazardous
substances.
This product was tested and complies with the regularities for a class of
digital devices stated under FCC part 15. These limits were specified to
provide reasonable protection against harmful exposure when operating
the device in a commercial environment. This product generates, uses and
may emit radio energy. It may in addition interfere with other radio
communication systems, if not installed or used according to this manual.
Using the device in residential areas may cause disturbances to be
possibly remedied at the user’s expense.
If installed properly according to this manual, the products
LUPUS – XT2 alarm panel (item. no. 12025; EAN: 4260195432512),
LUPUS – XT2 Plus alarm panel (item. no. 12045, EAN: 4260195433168),
LUPUS – XT3 alarm panel (item. no. 12120; EAN: 4260195433977), and
LUPUS – XT1 Plus alarm panel item. no. 12121; EAN: 4260195434240)
comply with CE regulations of Directive 1999/5/EG.. To avoid the risk of
electromagnetic interferences (e.g. with radios or radio traffic), it is highly
recommended to use shielded cables only.
To Next Page
Loading...