58
Smart home menu
In the Smart home menu, consists of the sub-menus “Automation”, “Wireless Plugs”,
“Cameras”, “Capture”, ”power consumption”, “temperature history”, and “Scenarios”.
Automation
The Home Automation menu allows the creation of up to 100 automation rules, to assign
them to up to ten groups, and have them executed in up to five profiles.
In the Automation menu, you can set up automations so that e.g. the alarm panel is
automatically armed or disarmed at a certain time when the bedroom is entered. You can
also control any consumer (device) via wireless power supply devices or relays
depending on temperature or other conditions.
Please note: The following chapter “Examples” explains some common home
automations and how they function.
Rules
Lists all rules in a table:
Use to add new rules.
Already created rules can be sorted by means of the title of each column or the
corresponding drop-down menus.
1. Active: Use the checkbox in front to activate or deactivate the rule (by default
always on).
2. Effective execution
Green checkmark: Rule is active and will be performed if the condition is met.
Red exclamation mark: Rule cannot be performed. Refer to “Profiles” for details in
this regard.
3. Nr.: A number is assigned to every rule (the first free number is chosen automatically).
You can change the number later on be means of the drop-down menu (1-100).
4. Name: You can assign a name of maximally 31 characters to a rule. Active rules are
highlighted in green, inactive rules in grey.
To Next Page
Loading...