EasyManua.ls Logo

Lupus Electronics XT 1 Plus - Magnetic Lock Installation

Lupus Electronics XT 1 Plus
332 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
222
Magnetic lock
Product description:
A magnetic lock in your door ensures that you can only open the door if you have
previously disarmed your alarm panel. Thus, false alarms are securely prevented. You
can overcome the magnetic lock with an effort of 60 kg.
The magnetic lock is combined with the wireless relay and, thus, can be connected to
the alarm panel (wireless relay is included).
The magnetic lock is supplied with electrical power by a 12 V 1 A mains adapter, which is
connected to the wireless relay. The magnetic lock must be connected to the wireless
relay to be supplied with power. Connect the white cable to pin 2 (GND) and the red cable
to pin 5 (relay - NO).
Depending on the switch settings of the wireless relay (see manual of wireless relay), the
wireless relay switches at different times. The DIP switches SW3+4 are deactivated by
default, hence, the magnetic lock is activated when the alarm panel is armed and
deactivated, when the alarm panel is disarmed. Therefore, you can only pass through the
door with a magnetic lock installed, if the alarm panel is disarmed.
Dimensions (in mm):
Magnetic lock
Metal plate

Table of Contents